|
| 貨號 | AkzoNobel 10P2-3/EC-110 |
| 品牌 | AkzoNobel |
| 是否危險化學品 | 否 |
| 型號 | AkzoNobel 10P2-3/EC-110 |
| 產品等級 | 優級品 |
| CAS編號 | |
| 純度 | 88% |
| 別名 | AkzoNobel 10P2-3/EC-110 |
| 密度 | 1000g/cm3 |
| 產地/廠商 | 美國 |
AkzoNobel 10P2-3/EC-110 Anti-Static Conductive Epoxy Coating防靜電導電環氧樹脂涂料
通過在玻璃纖維部件上添加一層AkzoNobel防靜電環氧樹脂涂料來減少靜電。涂層會產生導電膜，有助于防止靜電
Reduce static by adding a layer of AkzoNobel Anti-Static Epoxy Coating to fiberglass components. The coating produces a conductive film that helps prevent static, which can be dangerous in flight. The epoxy can be air cured or force dried depending on time constraints and is available in several package sizes to suit your needs. The coating goes on like paint and has a flat black finish. Only a thin layer is required for static protection.
AkzoNobel anti-static paint from SkyGeek is priced competitively and is designed to be easy to use. The coating is packaged in a pail and can be painted on using standard equipment. The product dries slowly and has a distinctive look once cured. It is designed for use on fiberglass components including those found on the outside of the aircraft. The epoxy coating consists of three parts base material and one-part curing solution. It must be thoroughly mixed before application and unused portions cannot be stored. When mixing, it important to ensure that all pigment components are thoroughly dispersed in the base formula before adding the curing solution.
AkzoNobel 10P2-3 Instructions
3 parts Base 10P2-3
1 part Curing Solution EC-110
Stir or Shake till all pigment is uniformly dispersed before adding curing solution.
Stir the catalyzed mixture thoroughly
