|
| 貨號 | AnoLube 9650 |
| 品牌 | AnoLube 9650 |
| 是否危險化學品 | 否 |
| 產品等級 | 其他 |
| 型號 | AnoLube 9650 |
| 包裝規格 | 桶 |
| CAS編號 | |
| 純度 | 98% |
| 別名 | AnoLube 9650 |
| 密度 | 1.6g/cm3 |
| 產地/廠商 |
AnoLube 9650 Solid Film Lubricant is a lacquer-like coating containing molybdenum disulfide and corrosion inhibiting pigments within a silicone vehicle. It is a specialized product designed to prevent galling and provide long wear life at high temperatures (500°F to 750°F) exceeding the operational ranges of AnoLube 9620A and conventional dry film lubricants and meeting Pratt & Whitney specification PWA 550U.
Higher pigment loading protects all metals from galling, fretting, and seizing. This solid film lubricant exhibits extremely low friction and anti-galling characteristics at loads in excess of 100,000 psi.
Typical Applications
AnoLube 9650 is an excellent solution to the problem of lubricating parts:
Where high operational temperatures are incurred
Which are seldom lubricated once they are built
Where operating pressures exceed the load bearing capacities of ordinary oils and greases
Where "clean operation" is desired (AnoLube 9650 will not collect dirt and debris as do grease and oils)
Where a protective coating and sacrificial breakin lubricant are needed
Where fretting and galling is a problem (as shown on gear teeth and roller bearing surfaces)
Physical Properties
| Coefficient of Friction: | 0.04 to 0.06 |
| Operating Temperature: | -300°F to 750°F (Intermittent temperatures to 1200°F) |
| Lubricative Pigment: | Molybdenum Disulfide |
| Color: | Flat Dark Gray |
| Thermal Stability: | Will not chip, crack or peel at temperatures exceeding 1000°F |
| Wear Life: | 200 – 250 minutes (Falex @ 1000 lbs. gauge load) |
| Load Carrying Capacity: | >100,000psi |
| Corrosion Protection: | Approx. 100 hrs |
